SEARCH DIAMOND SERVICE
Quartzite · Black Thunder · Dekton · Gangsaw · Fickert
CASE STUDY / DIAMOND DISCS FOR UCS

DEKTON DIAMOND DISCSGERMANY

A large Bavarian fabricator processing significant volumes of ultra-compact surfaces needed a cleaner solution for Dekton, especially on demanding 45° mitre cuts.

Germany GERMANY · BAVARIA · DEKTON
THE RESULT IN ONE LINE

45° CUT.WITHOUT THE CHIPS.

They had tested many discs. After ours, the search stopped.

THE CHALLENGE

Chipping was the problem.

A large fabricator in Bavaria processes a significant volume of Ultra-Compact Surfaces, especially Dekton. Their main problem was edge chipping, particularly on 45° mitre cuts, where conventional discs did not provide the finish they were looking for.

THE DIAMOND SERVICE SOLUTION

A disc developed for UCS.

Diamond Service supplied a dedicated Diamond Disc for UCS, developed specifically for ceramic and sintered ultra-compact surfaces, with a strong focus on cutting stability and edge quality.

THE RESULT

The search was over.

After testing the Diamond Service disc, the customer achieved the clean edge they were looking for, especially on 45° cuts. The result was convincing enough that the search for a better disc was over.

WHAT CHANGED

CLEANER EDGES.MORE CONFIDENCE AT 45°.

On ultra-compact surfaces, the quality of the cut matters as much as cutting performance. A stable disc and a clean edge reduce the problems that appear exactly where the job is most demanding.

45° mitre cutsCleaner edge quality on the most demanding cuts.
ChippingSignificantly reduced compared with the discs previously tested.
MaterialUltra-Compact Surfaces, especially Dekton.
Customer decisionAfter testing the Diamond Service disc, the search for an alternative stopped.
PRODUCT USED

DIAMOND DISC FOR UCS

Dedicated diamond-disc technology for ceramic and sintered ultra-compact surfaces such as Dekton and Laminam, developed with particular attention to edge quality and demanding mitre cuts.

VIEW DIAMOND DISC FOR UCS →

Is chipping compromising your 45° cuts on UCS?

Show us the material, machine and current cutting result.

TALK TO OUR TECHNICAL TEAM →